TS1 Programming Device

Part # TS1-PK

If you use your TS1 Ultrasonic Tank Sender for applications other than the standard settings, re-programming is necessary. Programming is a simple More...

WHERE TO BUY
Each in Package Height (in) * 3.6
Each in Package Width (in) * 4.6
Each in Package Length/Depth (in) * 5.3
Each in Package Weight (oz) * 4
RoHS Compliant (Restriction of Hazardous Substances Directive) ° Contact Compliance

If you use your TS1 Ultrasonic Tank Sender for applications other than the standard settings, re-programming is necessary. Programming is a simple process and can be carried out by purchasing this programming kit and following the detailed instructions supplied.

  • USB Drivers: For applications other than the standard settings, re-programming is necessary. Programming is a simple process and can be carried out by purchasing a programming kit, part number TS1-PK and following the detailed instructions supplied. Please go to the "Tech Data" tab to download the applicable USB Drivers and Installation Instructions. If you are not confident in carrying out your own programming, your supplier offers this service at an additional charge. Please note, unless otherwise stated, the purchase price for the TS1 is for the standard configuration only, and does not include reprogramming.
  • BEP TS Programmer: BEP TS Programmer is a 32-bit Windows application used to pre-program the parameters of the TS1 ultrasonic tank sender via a computer COM port. These parameters are stored in the non-volatile memory in the tank sender and must be set correctly for TS1 to work with different tank shape, size and fluid type. These parameters are classified into two categories: 1. Sensor Parameters and 2. Linearisation Parameters