Product Details:

Introduction

The Emergency Parallel function can be operated through a remotely mounted momentary switch or button. When activated, the 720MDO-EP is preprogrammed to remain in parallel mode for 10 minutes. At any time, by depressing and holding the momentary switch or button for 5 seconds,  the emergency parallel activation will be cancelled.

Manual Operation: The motorised operation of the 720-MDO-EP can be overridden at any time by depressing the Yellow Control Knob and turning clockwise towards the "Manual On" position or anticlockwise to the "Manual Off" position. If the 720-MDO-EP detects a manual override the LED will start flashing rapidly.

LED Indications:

a. Auto Mode:

ON:   EP is engaged
OFF: EP is disengaged 

Rapid Flash: On 0.1 Sec & off 0.1 Sec;
The voltage is outside Specifications.
ie. Lower than 8V or higher than 30V

b. Manual Mode:
Rapid Flash: On 0.1 Sec & Off 0.1 sec;
720.MDO-EP is in manual override.

Specifications:

Continuous Rating:   500 Amps DC
Intermittent rating:    700 Amps DC
Cranking Rating:     2500 Amps DC
Maximum Voltage:      32 Volts DC
Operation: Manual On/Off
                 Motorised On/Off
Mounting: Recessed or surface
Auto operating range 8 to 30 Volts DC
Ignition Protected
Stud Size: 2 x 12mm (1/2")
Tin Plated copper studs and nuts
Power Draw: Switch is off position 7mA