Product Catalogue

SIGNAL INTERFACE, INCLUDES SEALS & PLUG

SKU:80-911-0013-00 (COPY)

Product Details:

The Signal Interface (SI) connects CZone™ to your external sensors, alarms and switching devices. The SI allows intelligent, automated operation of circuits depending on the state of the input. For example, the SI can be easily programmed to allow a fluid transfer pump and an alarm to turn on simultaneously when the SI detects that a low tank level has been reached.

Connect standard switches to the SI to allow control of CZone™ outputs.The module provides LED status indications for each input. This allows fast diagnostics while providing information back to CZone™’s Display Interface.

 

 

GENERAL SPECIFICATIONS:

  • Accepts inputs from traditional switch types being used to control outputs
  • Accepts inputs from switches to trigger alarm i.e. high water float switch
  • Accepts inputs from industry standard tank senders (0-5V, 10-180Ohm, 240-33Ohm)
  • Accepts inputs from general voltaic or resistive signals can be used for controlling outputs or to display a physical position i.e. show a hatch is partially open.
  •  LED status indicators for each input
  • H 100mm (3”29/32) x W156mm (6”3/32) x D 42mm (1”5/8)
  • IPX5 water ingress protection

 

 

 

Terminal Block

Water Proof Cable Seal

 

NMEA 2000 Connector

 

 









 

 
  

 

 

 

Copyright © BEP Marine Ltd. All Rights Reserved
Web Design and Content Management by Benefitz